ANY-WEIGH® Bench Scales

C2® Electronic Calibration Hardy Instruments' C2® core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights. Read more about C2® Electronic Calibration INTEGRATED TECHNICIAN® Hardy Instruments Integrated Technician (IT) core feature helps you troubleshoot your weighing system and diagnose problems from the front of the instrument or via the PLC.  Read more about INTEGRATED TECHNICIAN® THE BUTTON Hardy Instruments' THE BUTTON lets you calibrate your weighing system in seconds by just pushing a button. Read more about THE BUTTON WAVERSAVER® Hardy Instruments' WAVERSAVER core technology eliminates the effects that surrounding vibration has on the scale weight signal, providing only true data for fast, accurate weight reading. Read more about WAVERSAVER®

Value and flexibility in size and capacity

Hardy Instruments ANY-WEIGH Bench Scales can be used for general check weighing or filling applications, placed under a feeder for loss-in-weight rate control, or for general Quality Assurance (QA) laboratory work. ANY-WEIGH Bench Scales are resistant to moisture with a stainless steel top, powder coated steel base, and conformal-coated internal circuitry. However, they are not intended for immersion in liquids or severe wash-down applications.

SIZES/CAPACITIES

They are available in two standard sizes with multiple capacities. They range in height from 1.54in (39.1mm) to 2.05in (52.1mm).

Scale size: 12 inch by 12 inch (298mm by 298mm)
Scale capacities: 33, 66, 130 lbs (15, 30, 60 kg)

Scale size: 24 inch by 24 inch (600mm x 600mm)
Scale capacities: 130, 330, 660, 1,300 lbs (60, 150, 300, 590 kg)

TYPES

All sizes and capacities are available in four different types:

1) Universal Scale HI SBU Series
This is a standard strain gauge based bench scale for use with any strain gauge based weighing instrument or controller. It comes with a 15-foot 6-conductor cable for interfacing with an instrument. It has C2® electronic calibration capabilities built-in. This series replaces the HIPS Series of platform scales.

Model numbers are:

• HI 1212SBU-33 (66 or130)
• HI 2424SBU-130 (330, 660 OR 1,300)

2) DeviceNet Scale HI SBD Series
This version come with a built-in DeviceNet interface so you can use this scale to provide a weight output to any point on the DeviceNet Network. It provides 20-bit resolution with a selectable conversion rate of 10 or 55 updates per second. It comes from the factory pre-calibrated and pre-wired with a DeviceNet micro C connector for easy installation to a network. Just set in an address (dip switch on bottom), connect to your network, configure and it is up and running. Power is provided from the DeviceNet network. The ANY-WEIGH outputs Gross, Net and Tare weight values and accepts inputs for zero and tare. Need to recalibrate? One push of "THE BUTTON®" automatically recalibrates the scale. The HI SBD series also supports C2® electronic calibration over its DeviceNet interface. Vibration on the scale is no problem with its built-in WAVERSAVER® technology. The HI SDB Series is a referenced Global product in Rockwell's (Allen-Bradley) Encompass partnering program.

Model numbers are:

• HI 1212SBD-33 (66 or130)
• HI 2424SBD-130 (330, 660 OR 1,300)

3) Analog Scale HI SBA Series
This version comes with a built-in strain gauge transmitter providing a 4-20mA output proportional to the weight reading directly to a control system. The HI SBA comes with a 15-foot two wire shielded cable which carries DC power to the scale and the weight signal from it. The scale comes pre-wired and pre-calibrated from the factory but provides potentiometers for coarse and fine zero adjustment as well as span. It does not have C2 or WAVERSAVER capabilities.

• HI 1212SBA-33 (66 or130)
• HI 2424SBA-130 (330, 660 OR 1,300)

4) Analog Hazardous Scale HI SBAFM Series
This version comes with a built-in strain gauge transmitter providing a 4-20mA output proportional to the weight reading directly to a control system. These scales are Intrinsically safe* for use in Class I, II, Div 1, Groups A, B, C, D, E, F and G, T4. The HI SBAFM comes with a 15-foot two wire shielded cable which carries DC power to the scale and the weight signal from it. The scale comes pre-wired and pre-calibrated from the factory but provides potentiometers for coarse and fine zero adjustment as well as span. It does not have C2 or WAVERSAVER capabilities.

*Intrinsic barriers are required

Model numbers are:

• HI 1212SBAFM-33 (66 or130)
• HI 2424SBAFM-130 (330, 660 OR 1,300)