ANY-WEIGH® Floor Scales Accessories

Easily configure a solution to meet your individual applications

Ramps  HI AR Series are made of mild painted or stainless steel with a five-degree slope for easy access onto the scale. Each ramp comes equipped with two integral bolt down plates and anchor bolts

Pit frames  HI APF Series allow the scale to be mounted in the floor with its deck flush with the floor. This is a one-piece welded stainless or mild steel unit with no additional welding required and which acts as a form when poring concrete

Bumper guards  HI ABG Series protect the scale from direct hits by forklifts, etc, The guards are slightly higher than the scale and will help deflect the forks.

Bolt down plates HI ABDP Series come in sets of two or four with anchor bolts to hold the scale in place

2 ¼” Lift eyebolts (1/2 – 13 x ½”) HI EB2.25D-1 for easy handling of the scale

Eyebolt hole plugs  Hi HP1-3 a set of 2 with a ¼” recessed hex head to protect the thread holes from accumulating material